All posts by HelpAdvancedLaserMT


Nukon Pro Vento 315 4kw Fabtech

Special Fabtec Demo Sale
Nukon Pro Vento 315 4kw DEMO
nukon-pro-vento-315-4kw-fabtech  cnc-control-unit  radan-cutting-green
Save over $50,000

Original Price: $561,500


  • SAVE OVER $50,000
  • READY FOR DELIVERY: $509,000





Save 10-20% if by 12-30-2016

Save 10%-20% if you sign a contract by December!

Want to save 20% to 40% on your next machine purchase?

Section 179 Deduction

Purchasing new equipment and saving a great deal of money is simple! Because the government has actually increased the 179 tax deduction—tax savings are practically possibly for everyone! This increase actually is encouraging the purchase of new equipment. Businesses can write off upwards of $500,000 within the very first year alone. And put this alongside the standard bonus and normal depreciation that happens and you’ll find you really can shovel in quite a savings to apply for your next major purchase. Due to the fact that every tax situation can vary, we encourage a consultation with a professional tax adviser.



Machine Cost (Example) 650.000.00
Section 179 Deduction for 2016: $500.000.00
* Bonus 50% Depreciation for 2016: $75.000.00
20% Standard Depreciation: $15.000.00
Total First Year Deduction: $590.000.00
Cash Savings on your Equipment Purchase
(Assuming a 35% tax bracket)
Lowered Cost of Equipment $443.500.00

Note: This table assumes standard depreciation over five years. The above table is for illustration purposes only. Everyone’s tax situation is different, please consult your tax advisor.

Section 179 American Recovery and Reinvestment Act

Section 179 will be at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment will have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.

Also, 50% Bonus Depreciation will be extended through 2019 but is only available on New equipment purchases. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.




This contemporary machinery provides versatility and dependability when fabricators need it the most! Not only are professionals going to receive more intuitive machinery—they are also going to gain easy accessibility and fine-tuned mechanics. Most certainly this is advanced machinery that takes sheet metal jobs to an entirely new level. As with most high-end machines like this one, you’re going to find you gain a boost in productivity, but more importantly operators gain higher safety, higher accuracy and far easier maintenance that can be managed remotely. Further, all components of this machinery are carefully reviewed and selected to ensure that optimal functioning is consistent and without hiccups. Ultimately here, when you want more freedom on the job, this machinery provides a performance ratio that is ideal and customization is always possible on any job. When you want to gain speed, but maintain precision—this is the long-term solution you’re looking for. The standard features are listed below:

  • Robust steel frame (ST44A1) machined with high precision (up to 0,01 mm) and welded by professional certified welders.
  • Chrome covered and honed cylinders and ground pistons with high quality seals.
  • NexT 3.0 3D/2D 17” Touchscreen CNC Controller.
  • Hoerbieger Hydraulics.
  • 510 mm Throat depth.
  • High Stroke and Daylight.
  • Wila Hydraulic top&bottom tool clamps with European and/or American type fitting.
  • Y1 – Y2 Synchronized hydraulic cylinders.
  • High resolution linear scales for synchronized ram operation.
  • X1,X2 + R1,R2 + Z1 + Z2 servo backgauge running on ballscrews and linear guides.
  • Sliding Front Support Arms.
  • Side Guards and back photocells for safety.
  • Siemens electrical system.
  • High Safety Pilz PLC system.
  • CNC Crowning System.
  • Visiobend Led Guide System.



Masterfully designed but economical friendly and advantageous when it comes to performance—the Maestro series is highly popular for many reasons. Not only do you gain a superior hydraulic system with this specific model—you also have components that guarantee perfect alignment each time, no matter the size of the job! This all-purpose machinery works effortlessly in any production environment! The Maestro press brake has a wide berth of components and a substantial amount of features. Machine set up is always friendly, which saves time and helps operators get to work in the proper time frame. And we cannot forget about the high end linear scales of this machinery! You have absolute accuracy every time. Nothing is better than that! The standard features are listed below:

  • Robust steel frame (ST44 A1) machined with high precision (up to 0,01 mm) and welded by professional certified welders.
  • Chrome covered and honed cylinders and ground pistons with high quality seals
  • NexT 2.0 10” 2D Touchscreen CNC Controller or Cybelec Cybtouch 12, 12” 2D Touchscreen CNC Controller
  • Hoerbieger Hydraulics
  • 510 mm Throat depth
  • High Stroke and Daylight
  • Quick release tool clamps with European and/or American type fitting
  • Y1 – Y2 Synchronized hydraulic cylinders
  • High-resolution linear scales for synchronized ram operation
  • X servo backgauge running on ballscrews and linear guides
  • Sliding Front Support Arms
  • Side Guards and back photocells for safety
  • Siemens electrical system
  • High Safety Pilz PLC system
  • Manual Crowning System

EasyFab II


If you’re an industrial professional seeking machinery that focuses heavily on enhancing performance and which is perfect for adding last minute adjustments—we’d say this is an item you’d want in your workshop! There is no doubt the operator is going to have easier operation with this press brake machine—and on the flipside, this means a maximum boost to productivity. We understand that project costs are always a primary concern for professionals. Therefore, we stand by the Easy Fab II Press Brake Machine. You will gain cost effectiveness—and no doubt, you’ll have more stability, flexibility and most definitely that higher productivity you’re after! The standard features are listed below:

  • Robust steel frame (ST44A1) machined with high precision (up to 0,01 mm) and welded by professional certified welders.
  • Chrome covered and honed cylinders and ground pistons with high quality seals.
  • NexT 3.0 3D/2D 17” Touchscreen CNC Controller OR Cybelec ModeaPac,2D 15“ Touchscreen CNC Controller.
  • Hoerbieger Hydraulics.
  • 510 mm Throat depth.
  • High Stroke and Daylight.
  • Quick Release Promecams tool clamps with European and/or American type fitting.
  • Y1 – Y2 Synchronized hydraulic cylinders.
  • High resolution linear scales for synchronized ram operation.
  • X,R axes servo backgauge running on ballscrews and linear guides.
  • Sliding Front Support Arms.
  • Side Guards and back photocells for safety.
  • Siemens electrical system.
  • High Safety Pilz PLC system.
  • CNC Crowning System.

4 Axis CNC Press Brake


Yes, the Accurl 4 Axis CNC Press Brake machine is designed for efficiency, but most importantly—this machinery guarantees speed and higher production. Professionals see this item as one which is more cutting edge than most—clearly designed for the future! Operators will love the fact that this machine helps to maximize on the highest quality results while decreasing per unit costs. All cylinders and valves are perfectly synchronized to perform repetitive actions without friction or hiccups to the mechanics. Furthermore, this is an ergonomic friendly design, much like its predecessor the 3 Axis CNC Press Brake. This means that maintenance can be carried out easier and with less time involved. In fact, there is very little maintenance needed for this machine. We want to also point out that this specific model exceeds safety specifications. The various safety switches and guards offer more protection for the operator, while in use. So, why not put a machine to work that can handle the heavy duty jobs perfectly, but always with accuracy, safety and reliability in mind and at a price you can afford! The standard features are listed below:

  • Mono block, welded steel frame rigid to deflection and high tensile with ST44 A1 material.
  • 4 axis (Y1, Y2, X, R-axis).
  • Back gauge system with X, R-axis driven by AC servo with colored graphics.
  • HOERBIGER servo hydraulic system.
  • Hardened and ground standard sectioned top and 4V-Die bottom tools (835 mm section).
  • Easy to clamp tool holding system with upper and lower tools.
  • Standard graphic controllers can be selected from: Delem DA56s 2D color graphical touch screen controller and Cybelec Mod Eva 12S.
  • Electrical panel with cooling system designed to meet CE standards.
  • Ergonomic user friendly, pendant control panel.
  • Back light safety guards (category-4).
  • Front side covers with safety switches.
  • Synchronization of the Y1+Y2 axis provided by linear encoders with 0.01mm tolerances.
  • Foot pedal meets CE regulations.
  • Sliding front support arms with T slot and mm/inch rulers.
  • Throat depth 410 mm.

3 Axis CNC Press Brake


Can you imagine acquiring a press brake machine that not only delivers consistent accuracy, but also provides double the production as other similar machinery? Not only does the Accurl 3 Axis CNC Press Break machine award high performance-it offers easy maintenance options too! For instance, when you need to switch out components, or specific tools at the front of the machine, the ergonomic design makes this type of changeover very simple! Now, add in the fact that automatic calibration is awarded every time the machine is turned on and you immediately gain some time savings! Programming and navigation features are also user friendly, which gives the operator much more control and freedom! When professionals want machinery that carries 5 stars across the board, they’ll be more than satisfied with this specific machine for the long-term. The standard features are listed below:

  • Height adjustable and movable sliding front support arms.
  • Top and bottom tools are surface hardened by special treatment.
  • Promecam easy clamping system.
  • Delem DA52s CNC controller.
  • CNC controlled strong X=800 mm back gauge.
  • 410 mm throat depth.
  • 2 back gauge fingers.
  • Scales in metric and inches.
  • Crowning system in bottom beam 2500/…/4100 hydraulic crowning and from 600 tn and above motorized crowning is standard.
  • Foot pedal is produced according to CE standards and suitable for single and multiple bends.
  • 2 photocells are placed facing each other for rear guards.
  • Covers for cylinders and top beam.
  • Preadjusted electrical requirements based on customer’s geographical area.

NC Hydraulic Press Brake


This sheet metal NC hydraulic press brake is certainly built using top grade technology to ensure long-term usage, no matter how brutal the job might be! Professionals within the sheet metal industry find this machinery to demonstrate supreme dexterity—and is the simple solution for almost all metal working jobs! There is no doubt that you’ll be able to get precision just where you need it the most in any metal fabrication job. This one might present as simple, but it is extremely powerful. The body design of this machine is fully automated with continuous operation modes that make the work easier for the operator! Safety is also a big priority in the design of this ergonomic friendly machine. In fact, due to the safety barrier and the electrical interlocker—the operator couldn’t ask for a higher level of operation safety! So, when you’re looking for a powerful sheet metal machine that can practically take on any metal bending job safely, effectively and cost efficiently, there’s no need to look further than right here! The standard features are listed below:

  • The brake press is fitted with intermediate upper clamps to prevent wedging
  • Plate support arms
  • Powered adjustment of axis depth
  • Backstop
  • Light guards
  • Top and bottom tooling
  • Estun E21 NC control
  • German Bosch-Rexroth hydraulic system
  • Telemecanique/Schneider Electric components
  • Hydraulic and electrical overload protection
  • Squaring arm and front support arms
  • Delta inverter with ball screw and polished rod with 0.05 mm accuracy

Fast Cutting Laser Machines


Fast Cutting Laser Machines

In the dynamic and constantly changing industrial market, Advanced Laser & Machine Tool is aware of the value in a respectable  name, high quality machines, dependable and excellent after-sales service.
Certainly every laser cutting machine that you purchase from AL&MT will be a long-term investment in your company’s future!
We invite you to be a part of the family of Advanced Laser & machine Tool and help us in our mission of changing the future!


Click the image above to view an energy consumption comparison between fiber laser and CO2 laser.

Linear drives disadvantages:

› Non-continuous process – they go back to home position every time
› High technology with a high amount of after-sales service
› Magnetizes and attracts metal dust
› High energy consumption
› Require an additional chiller

Why do AL&MT’s  NUKON machines use rack and pinion driven by servo motors?:

› Best system for uninterrupted operations/very little service
› Precise and well-tested
› After reaching it’s peak the speed is reduced, but it does not affect the cutting speed at all
› Energy consumption optimization

Motors & Drives in Fiber Laser

Servo Motors + Rack and Pinion Linear Drives
Acceleration Speed (G) 1,5G 3G
Axis Speed 7086”/min 7874”/min
Additional Energy Consumption 0kW/h +20kW/h
Positioning Speed ±0.002” ±0.0004
Repeatability ±0.0007 ±0.00043
  • Light Source: cable from laser diodes with low energy consumption
  • Active medium: doped ytterbium ions
  • Active fiber: double coated fiber cable with fiber Bragg grating (FBG)
  • Wave legnth: 1,0nm (Near-infrared)
  • Speed: extreme speed in thin sheets cutting Optical path: the laser beam is delivered through cable, no mirrors
  • Energy efficiency: 35% Low operating costs
  • Low-cost maintenance in the long run
  • Optimum absorption rate of the beam
  • Seamless cutting of non-ferrous metals and alloys
  • Simplified structure
  • Environmental conditions do not affect the workflow (humidity, dust, vibrations)
  • Guiding of the laser beam is not necessary
  • Extended working hours of laser diodes : 100 000 hours
  • Extra space and an option for laser power upgrade

Criteria when choosing a machine tool

Cutting capacity
according to
material thickness
Fiber Laser .007”-1”
Plasma Cutting .25”-1.25”
Oxy-flame Cutting 1”-14”

Get In Touch


Advanced Laser Machine & Tool
30 Sullivan Dr., Bells, Tennessee 38006
Call Us
(731) 499-2951